Improving Wear Resistance of the Ni-base Thermal Spray-Welding Coating Using Rare Earths

ＩｍｐｒｏｖｉｎｇＷｅａｒＲｅｓｉｓｔａｎｃｅｏｆｔｈｅＮｉｂａｓｅＴｈｅｒｍａｌＳｐｒａｙＷｅｌｄｉｎｇＣｏａｔｉｎｇＵｓｉｎｇＲａｒｅＥａｒｔｈｓＺｈａｉＧｕａｎｇｊｉｅ（翟光杰）（ＩｎｓｔｉｔｕｔｅｏｆＰｈｙｓｉｃｓ，ＡｃａｄｅｍｉｃａＳｉ...     

Intracellular localization of the antitumour drug adriamycin in living cultured cells: A confocal microscopy study

The intracellular distribution of the anthracyclinic antibiotic adriamycin in living cultured cells has been investigated by confocal microscopy. In human melanoma cells (M14), adriamycin was localized inside the nuclei. When adriamycin-treated M14 cells were allowed to recover in drug-free medium, a complete efflux of the drug from the nucleus was revealed. In recovered cells, a weakly fluorescent signal was observed in the perinuclear region. When M14 cells were recovered in a medium containing colcemid, a microtubule depolymerizing agent, the drug transport from the nucleus to the cell periphery appeared to be inhibited, suggesting that the microtubule network is strongly involved in drug transport mechanisms. In multidrug-resistant (MDR) cells the intracellular location of adriamycin was shown to be noticeably different from that of the parental wild-type cells. In particular, in resistant human breast carcinoma cells (MCF-7), adriamycin appeared to be exclusively located within the cytoplasm whereas the nuclei were shown to be completely negative. When adriamycin treatment was performed in association with MDR revertants, such as Lonidamine (inhibitor of the energy metabolism) or verapamil (inhibitor of the P-glycoprotein efflux pump), a marked enhancement of the cytoplasmic signal was observed in resistant cells. Under these conditions, adriamycin appeared concentrated in the perinuclear region, but the nuclei were still negative. Confocal microscopy proved to be a very useful method for the study of the intracellular transport of fluorescent substances, such as anthracyclinic antibiotics, and for the investigation of the multidrug resistance phenomenon in tumour cells.     

微型无阀泵参数化结构设计及测试

 从理论计算和试验两方面研究了用于微流控化学分析芯片的微型无阀泵流动特性，初步建立了微型无阀泵流道结构的数学模型，重点讨论了结构参数的选取原则及相应的流动阻尼系数的计算方法． 通过试验验证了数值计算的可靠性，为微型无阀泵参数化设计及优化提供了理论依据及经验曲线．     

Incoloy 800H合金的应用和性能分析

通过对耐热耐蚀合金Incoloy 80 0H的性能分析 ,指出它与普通奥氏体不锈钢相比具有较优的抗氧化性能、耐蚀性和高温蠕变强度。针对催化裂化装置同轴式沉降再生器内部所用Incoloy 80 0H焊件易出现裂纹的问题进行分析 ,认为在施焊过程中由于合金凝固时有低熔点金属或化合物的液态膜残留在晶界区 ,该合金具有高的焊接热裂纹敏感性 ,若焊材选择不当 ,焊丝填充不充分、缺少保护气等将导致晶间裂纹产生。提出了该合金采用TIG焊接防止热裂纹产生的措施。     

激光熔覆Ni基SiC合金涂层组织与性能的研究

利用5kWCO2连续波激光器在16Mn钢基材表面对含20%(体积比)SiC陶瓷粉末的镍基自熔性合金粉末进行激光熔覆得到Ni基SiC合金涂层(NiSiC)。研究了合金涂层的组织形貌及相结构,并用单纯的镍基合金涂层(Ni60)进行了显微硬度及滑动磨损性能的对比试验。结果表明,NiSiC合金涂层由γ枝晶及其间的共晶组织组成,主要组成相为γ-Ni,γ-(Ni,Fe)固溶体和(Cr,Fe)7C3,Cr23C6及(Cr,Si)3Ni3Si等化合物。添加SiC的镍基合金涂层NiSiC比单纯的镍基合金涂层Ni60具有较高的硬度和耐磨性。     

水溶性丙烯酸涂料的环氧树脂改性

本实验论述了水溶性丙烯酸钢铁底漆涂料制备、性能以及用环氧树脂对其进行改性。原水溶性丙烯酸钢铁底漆涂料在进行耐盐雾测定试验时仅为 72h ,未通过国家规定标准。本实验的目的在于 ,以丙烯酸树脂为主要成膜物质 ,加入其他的辅助成膜物质 ,如环氧树脂来改善其抗盐雾、抗腐蚀、耐候等性能。结果表明 ,一定温度下在水溶性丙烯酸钢铁底漆涂料中加入 1/ 7的环氧树脂后 ,经测定其耐盐雾性可达 10 6h ,达到了国家的规定标准     

PVD涂层工艺在M3滚刀上的应用

对M3滚刀进行了物理气相沉积 (PVD)工艺试验。经高温耐磨试验和切削试验证明 ,M3滚刀经TiN涂层后 ,其耐磨性和使用寿命显著提高。     

提高自蔓延陶瓷内衬钢管耐蚀性研究的进展

广泛应用于石油，化工，能源等领域的钢管，除了要有高强度外，还要有良好的耐蚀性。自蔓延高温合成技术是制备耐蚀钢管的新技术，具有工艺简单，成本低和产品耐蚀性能好等特点。介绍了自蔓延高温合成陶瓷内衬钢管的原理和提高陶瓷内衬钢管耐蚀性的措施，展望了耐蚀陶瓷内衬钢管在工业生产上的应用前景。     

峡口水库沥青混凝土面板的施工与试验

以灌溉、防洪为主的峡口水库大坝，为沥青混凝土面板堆石坝，为研究低温抗裂性能，对沥青混凝土面板破损取样，进行了配比和多种力学性能试验，并与原面板设计指标进行了对比。由于面板经受住了－20℃以下的低温考验，其所用沥青指标、破损取样试验结果，特别是冻断低温指标，对确定水工沥青混凝土低温抗裂检验标准有重要参考价值。     

硅光电负阻器件的构成原理与分类

将三端负阻器件与硅光电探测器相结合 ,通过新的构思成功地提出并构成了一类新型光电器件——硅光电负阻器件。文中报道了该器件构成的一般性原理 ,以及依据此构成原理确定的分类方法